Fireworks Manufacturing Supplies

High quality, spiral wound, cardboard, #100 mortar tubes. A cheap alternative to fiberglass or HDPE tubes. These tubes are not plugged. Here's h...

Dimensions: 3/4" inside diameter, 1-1/4" outside diameter, 1/4" wall, 30 inches long. These uncut, parallel wound tubes can be cut to any length y...

Dimensions: 1" ID, 1-1/2" OD, 1/4" wall thickness, 12" length 3 pound rocket tubes. These parallel wound tubes can also be used to make fountains,...

Small mortar tubes perfect for firing flying fish fuse and other small mines. How to Make Flying Fish Fuse Mines Dimensions: 3/4" ID, 7/8" OD, 1/...

Dimensions: 1-1/2" ID, 2" OD, 1/4" wall thickness, 32" length Uncut parallel wound tubes for black powder rockets, whistle rockets, strobe rockets...

Dimensions: 1" ID, 1-1/2" OD, 1/4" wall thickness, 36" length Uncut parallel wound tubes for black powder rockets, whistle rockets, strobe rockets...

2" 37mm Pay Load Tubes are designed to be used with 37mm hulls. Use your own homemade black powder and load these up with your choice of Stars, Smo...

1-1/4 inch ID cardboard mortar tubes. These parallel wound tubes are unplugged with a blue outer wrapping. They can be used to fire small shells, c...

Dimensions: 5/16" ID x 4" Length x .015 Wall .395" OD, Wall Flat End Kraft Tubes Part #TU2020

Parallel wound rocket tubes made specifically for 3-pound stinger missiles. These tubes are shorter than core burner rocket tubes and are not inter...

Parallel wound rocket tubes made specifically for 1 pound stinger missiles. These tubes are shorter than core burner rocket tubes and are not inter...

1" OD spherical plastic shells with plastic lift cup molded to bottom halves. Comes in two halves, the bottom one with 3/32" fuse hole. Shell halve...

1-1/8" OD spherical plastic shells with plastic lift cup molded to bottom halves. Comes in two halves, the bottom one with 3/32" fuse hole. Shell h...

Make your first aerial shells from start to finish in an hour or less! This kit uses plastic shells which are glued and taped. They make a beautifu...

These Limited Edition Nesting paper hemispheres are from the 1960's ! These bad boys have been kept in pristine condition and are of superior quali...

1-5/8" spherical plastic shells make 2" shells when pasted and fused. Come in two halves, one with a 3/32" fuse hole. Shell halves seal together wi...

These paper hemispheres come in sets of 2 halves and are approximately 1.45" in diameter before pasting.  20 sets Part #PS2015

These paper hemispheres come in sets of 2 halves and are approximately 1.55" in diameter before pasting.  20 sets Part #PS2017

These paper hemispheres come in sets of 2 halves and are approximately 1.75" in diameter before pasting.  20 sets Part #PS2020

These paper hemispheres come in sets of 2 halves and are approximately 2.1" in diameter before pasting.    These shells will fit the 10pk Cut Tub...

Make your first aerial shells from start to finish faster then you ever thought possible! This kit uses paper shells which you'll learn to paste wi...

These cylindrical plastic shells are 1-15/16" before pasting. They come in two parts, the can and the lid. The lid has a 3/32" visco fuse hole. Met...

These cylindrical plastic shells are 1-15/16" before pasting. They come in two parts, the can and the lid. The lid has a 1/4" visco fuse hole. Meth...

This kit contains enough 2.5-inch plastic shell parts and fuse to make 50 shells.   It comes with 10 tubes and bases so you will have enough mortar...