Click here for Skylighter's home page
Table of Contents>> Fireworks Making Products - Electric Ignition Supplies
We feature the following Fireworks Making Products - Electric Ignition Supplies. Click on a product to view more detailed information:
| GN6080 Cable, Electrical Firing, DB25, 100 Feet Use this DB25 cable to connect the GN6010 firing system to GN6090 10-Position Slats. Can be used indoors or out and enables you to fire your fireworks or pyrotechnic effects from a safe distance. |
| ZGN5035 Electric Match Foundation Boards Wrap foundation board strips with nichrome wire (GN5020). Coat boards with solder, and then snip off little bits to make electric match heads. Solder a piece of shooting wire (GN5010) onto back end of the match head, one lead on each side. Dip each m... |
| GN5030 Electric Match Heads Used to make inexpensive electric matches. Our match heads are already wrapped with 51 gauge nichrome wire and soldered. To use them you solder a piece of shooting wire (GN5010) onto back end of the match head, one lead on each side. Dip each match ... |
| GN5003 Electric Matches, E-Max Electric Matches, E-Max. Yellow, 6 foot lead wires. Match heads are 1/8 inch wide and are not covered with sleeves. |
| GN5000 Electric Matches, OXRAL Electric Matches, Oxral. Blue and red, 6.5 foot (approximately 2 meter) lead wires. Match heads are 1/4 inch wide. Each matchhead covered with a plastic sleeve that protects the head from impact and directs the fire forward, toward the device to be ... |
| GN6010 Electrical Firing Box, 10 Cue This is a capacitor-discharge (CD) 10-cue (or channel) firing box. It is used to remotely fire one or more electric matches. It operates much like our single-cue, GN6001, but has 10 channels instead of one. Each channel (or cue) can fire 1-50 matche... |
| GN6011 Electrical Firing System - 10 Cue Kit With Firing Box, Cable, and Slat Shoot your next fireworks display electrically. Just push the buttons and enjoy the show instead of missing all the action when you fire it by hand. This is a complete firing system. All you need to add is batteries and electric matches. Contains ... |
| GN6001 Electrical Firing System, 1 Cue This is a capacitor-discharge (CD) single cue (or channel) firing box. It is used to remotely fire one or more electric matches. It is ideal for firing fronts containing many matches wired in series (daisy-chained). This small but powerful CD unit ca... |
| GN5005 Ematch Tester test Battery powered continuity tester designed to test electric matches prior to attaching to any device. Current is well below 50mA. Simply touch one wire of an electric match to the button battery and the other wire to the metal contact on the other si... |
| GN5020 Nichrome Bridge Wire This wire is used with to make electric matches and match heads. It is .0012 inch in diameter, 10 feet long and wound on a spool. |
| GN5025 Nichrome Igniter 6-inch length of non-insulated nichrome wire which burns completely when electricity from 120 volt AC outlet is applied to the ends. These igniters are for use in our #FX0600 Electric Flash Pot for Non-Concussion flash powders. Package of 12. |
| GN5010 Shooting Wire 2-wire, solid copper, 22 gauge. Yellow insulated. Red polarity stripe on one wire. Used for connecting electric matches to slats or to electrical firing systems. |
| GN6090 Slat, Electrical Firing, 10 Position Slats are used to connect electric matches to the power source of an firing system. Each slat can accomodate up to 10 firing cues. Any cue can in turn, consist of from 1-50 electric matches if you use our CD firing systems and fresh batteries. Slat... |