Fountains

These videos show you some of the steps used to make two different types of fireworks fountains using a black powder base mix and either 80-mesh charcoal or ferro-titanium for sparks.

This page contains videos from the Turbo Pyro Supplies Kit and eBook.

If you would like to learn to make fireworks in as little as one weekend check out the Turbo Pyro Kit and accompanying eBook.

Make 92 fireworks in 2 days with Turbo Pyro!

Finished Fountains

Examples of the two types of fountains made in this project, an 80-mesh charcoal fountain and a ferro-ti fountain.

Weighing & Mixing Fuel

How to weigh out and mix the black powder base mix and spark additives for two different types fountains.

Ramming Nozzle

How to hand ram a bentonite clay nozzle for your fountains using the Turbo Pyro tooling.

Marking Drift

Where to mark a no-pass line on your solid drift so you know when to switch from the hollow rammer to the solid rammer.

Ramming Fuel

How to safely hand ram fountain fuel using the Turbo Pyro tooling.

Ramming Bulkhead

Ramming a bentonite clay bulkhead in your firework fountain using the Turbo Pyro tooling.

Installing Fuse

Installing visco fuse and a stick onto your firework fountain for safe lighting.

Fountain Fan

A fan of three ferro-titanium fountains firing at once.

This page contains videos from the Turbo Pyro Supplies Kit and eBook.

If you would like to learn to make fireworks in as little as one weekend check out the Turbo Pyro Kit and accompanying eBook.

Make 92 fireworks in 2 days with Turbo Pyro!
Previous article Helicopter
Next article Flying Fish Fuse Mine