Products

Small mortar tubes perfect for firing flying fish fuse and other small mines. How to Make Flying Fish Fuse Mines Dimensions: 3/4" ID, 7/8" OD, 1/...

High quality, spiral wound, cardboard, #100 mortar tubes. A cheap alternative to fiberglass or HDPE tubes. These tubes are not plugged. Here's h...

Tubes: High quality, spiral wound, cardboard, #100 mortar tubes. A cheap alternative to fiberglass or HDPE tubes. These tubes are not plugged. ...

2-1/4" spherical plastic shells make 2-1/2" #100 shells when pasted and fused. Come in two halves, one with 3/32" fuse hole. Shell halves seal toge...

2-1/4" spherical plastic shells make 2-1/2"  #50 shells when pasted and fused. Come in two halves, one with 1/4" fuse hole. Shell halves seal toget...

1-1/4 inch ID cardboard mortar tubes. These parallel wound tubes are unplugged with a blue outer wrapping. They can be used to fire small shells, c...

1-5/8" spherical plastic shells make 2" shells when pasted and fused. Come in two halves, one with a 3/32" fuse hole. Shell halves seal together wi...

These cylindrical plastic shells are 1-15/16" before pasting. They come in two parts, the can and the lid. The lid has a 3/32" visco fuse hole. Met...

These cylindrical plastic shells are 1-15/16" before pasting. They come in two parts, the can and the lid. The lid has a 3/32" visco fuse hole. Met...

These cylindrical plastic shells are 1-15/16" before pasting. They come in two parts, the can and the lid. The lid has a 1/4" visco fuse hole. Meth...

Dimensions: .780" ID x 2" Length x .080" Wall .94" OD, Open End Kraft Tubes Part #TU2032

These bombettes come in two parts, the can and the lid. The lid has a 1/4" visco fuse hole. Bombettes can be used as timed inserts or individual mi...

Make your first aerial shells from start to finish in an hour or less! This kit uses plastic shells which are glued and taped. They make a beautifu...

1" OD spherical plastic shells with plastic lift cup molded to bottom halves. Comes in two halves, the bottom one with 3/32" fuse hole. Shell halve...

1-Ounce Core Burner Black Powder Rocket Tool Set. Each Black Powder Rocket Tool Set contains: - Base and spindle (total height 2 7/8") - One 3...

You can make 100 1-oz. black powder rocket with this kit.  Each kit contains: - Potassium Nitrate, 1 pound (#CH5302)  - Airfloat Charcoal, 1 pound...

This is a refill kit for our 1-oz. Black Powder Rocket Kit. It contains everything in that kit, except the 1/4-inch rocket tools. Each kit contain...

Dimensions: 3/4" inside diameter, 1-1/4" outside diameter, 1/4" wall, 30 inches long. These uncut, parallel wound tubes can be cut to any length y...

1 pound rocket tubes. These parallel wound tubes can also be used to make fountains, whistles or drivers. Dimensions: 3/4" ID, 1-1/4" OD, 1/4" wa...

Parallel wound rocket tubes made specifically for 1 pound stinger missiles. These tubes are shorter than core burner rocket tubes and are not inter...

Each tool set contains: - 1 Aluminum base, with bottom set allen head screw - 1 Stainless steel spindle, removable - 1 Hollow aluminum drift (ramme...

Stinger Missile fireworks are spin-stabilized fireworks rockets. When you light them, the rocket spins on a small pin, then flies up. They are gyro...

1 Pound Black Powder Rockets are easy to make. You can make them fast using this black powder rocket tooling and a simple mallet--no expensive pres...

1 Pound (3/4-Inch) Whistle Rocket Tool Set consists of: - Solid base & spindle - Hollow rammer - Solid rammer The hollow rammer forms the noz...

This kit has enough tools and supplies to make 25 complete 3/4-Inch Stinger Missiles with silver titanium tails.  Here's everything in the Stinger...

1" Wide Gummed Kraft Tape 500 Foot Roll Part #MS1501 Commonly used for pasting shells to give a nice even break as well as other fireworks proje...

1" Wide Pre-activated Gummed Tape 500 Foot Roll Part #MS1502 Commonly used for pasting shells to give a nice even break as well as other firewor...

These spiral wound tubes have thin walls so that they will burn completely up as the strobe flashes. How to Make Flashing Fireworks Strobe Pots D...

1-1/2" Wide Gummed Kraft Tape 500 Foot Roll Part #MS1503 Commonly used for pasting shells to give a nice even break as well as other fireworks p...

1-1/2" Wide  Pre-activated Gummed Tape 500 Foot Roll Part #MS1504 Commonly used for pasting shells to give a nice even break as well as other fi...

1-1/8" OD spherical plastic shells with plastic lift cup molded to bottom halves. Comes in two halves, the bottom one with 3/32" fuse hole. Shell h...

These tubes were made to be used in consumer fireworks ("Class C") mortar tubes. There's no "standard" consumer mortar tube size. So, be sure and m...

These paper hemispheres come in sets of 2 halves and are approximately 1.45" in diameter before pasting.  20 sets Part #PS2015

These paper hemispheres come in sets of 2 halves and are approximately 1.55" in diameter before pasting.  20 sets Part #PS2017

Yellow festival ball fiberglass mortar tubes: 1.9" nominal inside diameter x 13" long, approx. 3/16" wall with a heavy duty plug in the bottom. (Ot...