Fireworks Manufacturing Supplies

4-ounce rocket tubes were specially made so that plastic ball shell #PL2020 will fit on top of them. These parallel wound tubes can also be used to...

2" 37mm Pay Load Tubes are designed to be used with 37mm hulls. Use your own homemade black powder and load these up with your choice of Stars, Smo...

Length:  20 Feet  Burn Rate: 5 sec/ft  Diameter: 3/32" (3mm) Part #GN1016

High quality, spiral wound, cardboard, #100 mortar tubes. A cheap alternative to fiberglass or HDPE tubes. These tubes are not plugged. Here's h...

4" 37mm Pay Load Tubes are designed to be used with 37mm hulls. Use your own homemade black powder and load these up with your choice of Stars, Smo...

These cylindrical plastic shells come in two parts, the can and the lid. The lid has a 1/4" visco fuse hole. Methylene chloride or PVC cement can b...

Dimensions: 5/16" ID x 4 1/4" Length x .015" Wall .332" OD, Open End Kraft Tubes Part #TU2008 Same as our lance tubes, but open on both ends! 

Dimensions: 1" ID, 1-1/2" OD, 1/4" wall thickness, 12" length 3 pound rocket tubes. These parallel wound tubes can also be used to make fountains,...

1-1/4 inch ID cardboard mortar tubes. These parallel wound tubes are unplugged with a blue outer wrapping. They can be used to fire small shells, c...

Length:  30 Feet  Pre cut into 10 - 3 foot sections Burn Rate: 9.5-10 sec/ft  Diameter: 3/32" (3mm) Pink medium speed visco is excellent for co...

Spherical plastic firework shells, two halves, one with 7/32" fuse hole. Includes fuse washer and leader ring. These shells are to be used a 3" Mo...

These high-quality kraft paper hemispheres come in sets of 2 halves, they're 4-1/2" in diameter before pasting. 10 sets Part #PS2050

Dimensions: 13/16" ID, 7/8" OD, 1/4" wall thickness, 12" length Parallel wound red flare tubes intended to be used for making flares. Make your ow...

Make your first aerial shells from start to finish in an hour or less! This kit uses plastic shells which are glued and taped. They make a beautifu...

5" Paper Lift Cups 10 Pieces Part #PC1190

These high quality paper hemispheres come in 2 sets of 2 halves each. They're about 7-1/4" in diameter before pasting. 2 sets Part #PS2060

These tubes were made to be used in consumer fireworks ("Class C") mortar tubes. There's no "standard" consumer mortar tube size. So, be sure and m...

8" Paper Lift Cups 10 Pieces Part #PC1196

This kit contains enough 2.5-inch plastic shell parts and fuse to make 50 shells.   It comes with 10 tubes and bases so you will have enough mortar...

Very Fast Burning Yellow 1-2 sec/ft 325 ft.    Part #GN1209

These spherical plastic shells are 5-5/8" before pasting. They come in two halves, one with a 7/32" time fuse hole and one with a leader hook reces...

These high quality paper hemispheres come in 1 set of 2 halves each. They're about 9-1/4" in diameter before pasting. 1 set Part #PS2100

Make your first aerial shells from start to finish in an hour or less! This kit uses plastic shells which are glued and taped. They make a beautifu...