3D Print: Mortar Base For TU1375 *FREE DOWNLOAD*
$0.00
The TU1375 (1" ID x 6" Length) makes a great small mortar tube along with this base and is suitable for launching small shells made from the TU2032 (.780" ID x 2" Length).
The base is a nice snug fit but should be glued or stapled in place before use.
Recommended Print Settings:
Layer Height: 0.3mm
Nozzle: 0.4mm, Side: 5-walls
Top and bottoms: 6-layers
Infill: 50-100%
Print Orientation: Base Down