Products

1 Pound (3/4-Inch) Whistle Rocket Tool Set consists of: - Solid base & spindle - Hollow rammer - Solid rammer The hollow rammer forms the noz...

This kit has enough tools and supplies to make 25 complete 3/4-Inch Stinger Missiles with silver titanium tails.  Here's everything in the Stinger...

1" Wide Gummed Kraft Tape 500 Foot Roll Part #MS1501 Commonly used for pasting shells to give a nice even break as well as other fireworks proje...

1" Wide Pre-activated Gummed Tape 500 Foot Roll Part #MS1502 Commonly used for pasting shells to give a nice even break as well as other firewor...

These spiral wound tubes have thin walls so that they will burn completely up as the strobe flashes. How to Make Flashing Fireworks Strobe Pots D...

1-1/2" Wide Gummed Kraft Tape 500 Foot Roll Part #MS1503 Commonly used for pasting shells to give a nice even break as well as other fireworks p...

1-1/2" Wide  Pre-activated Gummed Tape 500 Foot Roll Part #MS1504 Commonly used for pasting shells to give a nice even break as well as other fi...

1-1/8" OD spherical plastic shells with plastic lift cup molded to bottom halves. Comes in two halves, the bottom one with 3/32" fuse hole. Shell h...

These tubes were made to be used in consumer fireworks ("Class C") mortar tubes. There's no "standard" consumer mortar tube size. So, be sure and m...

These paper hemispheres come in sets of 2 halves and are approximately 1.45" in diameter before pasting.  20 sets Part #PS2015

Experience precise and reliable timing with our 1.6 mm visco fuse. Sold in 1-meter pieces, each 30 seconds equals 1 foot, for a total length of 10 ...

These paper hemispheres come in sets of 2 halves and are approximately 1.55" in diameter before pasting.  20 sets Part #PS2017

Yellow festival ball fiberglass mortar tubes: 1.9" nominal inside diameter x 13" long, approx. 3/16" wall with a heavy duty plug in the bottom. (Ot...

1.91 ID x 11-3/4 inches long with wooden plug in bottom. These Mortar Tubes are either Black or Orange depending on stock.  Use these for consumer...

Make 1/2" Go-Getters with our all aluminum go-getter tooling!    "I think "go-getters" are the most entertaining fireworks stars that you will ev...

These spiral wound tubes are perfect for making box or pill-box stars. If you have never seen the effect of a pillbox star in the sky, you have mis...

This 1/2" star plate is a fast and simple way to produce large numbers of uniformly sized cylindrical stars quickly. Each set consists of a bott...

Star plates make perfect cylindrical fireworks stars with every pop of your star plate. In an hour, you can knock out hundreds of stars using this ...

Star plates make perfect cylindrical fireworks stars with every pop of your star plate. In an hour, you can knock out hundreds of stars using this ...

Length: 10 Feet  Burn Rate: 2 sec/in Part # GN2010 Diameter: 1/4" (6.35mm) 1/4 inch time fuse is commonly used inside fireworks shells to give ...

Perfect sized tube for 1-Ounce "super bottle" rockets.  Dimensions: 1/4" ID x 2" Length x .041" Wall .332" OD, Open End Kraft Tubes Part #TU2005

Dimensions: 1/4" ID x 4" Length x .041" Wall .332" OD, Open End Kraft Tubes Part #TU2007

100 Cap Plugs for covering the ends of time fuse. 1" long x 1/4" ID Part # PC0400

These high quality paper hemispheres come in 1 set of 2 halves each. They're about 9-1/4" in diameter before pasting. 1 set Part #PS2100