Products

Fin set fits many fireworks bottle rocket brands.   Designed By: rebeltaz

Nose cone fits many fireworks bottle rocket brands.   Designed By: rebeltaz

Fuse plug for converting the TU2032 (.780" ID x 2" Length) into a small shell suitable for backyard displays. The fuse hole is compatible with 2-3m...

The rocket is designed to use Estes motors which are either 18mm or 24mm in diameter (B, C, D series motors). You can buy rocket motors on the inte...

The TU1375 (1" ID x 6" Length) makes a great small mortar tube along with this base and is suitable for launching small shells made from the TU2032...

Fuse plug for converting the TU2032 (.780" ID x 2" Length) into a small shell suitable for backyard displays. The fuse cavity can be packed with st...

Concept for Round shell casing filled with exploding stuff. . Great for smoke bombs and ground effects if printed using PLA. For an aerial shell pr...

Solid plug for converting the TU2032 (.780" ID x 2" Length) into a small shell suitable for backyard displays. The plug is a tight fit and can be u...

The 3D Printed Mini Shells Supplies Kit contains all of the supplies you need to assemble 100 mini-shells and 5 mini-mortars, plus it contains an a...

This wonderful Stinger Missile REFILL Kit is easy to make and it's hefty size will satisfy the need to shoot missiles in the air and put a smile on...

This spectacular Stinger Missile Kit is easy to make and it's hefty size will satisfy the need to shoot missiles in the air and put a smile on your...

Effect fuses, such as this Willow Diadem Fuse are used in contracting fireworks shells and rocket headings. The fuse is cut into 1/2"-1" lengths an...

4" ID x 15 inches long with wooden plug in bottom. These HDPE Mortar Tubes are Black or Orange depending on current availability. IMPORTANT: Firin...

4 inch ID x 22 inches long, approx. 1/5" wall, with fiberglass resin plug in the bottom and structurally reinforced lip to prevent fraying. Weighs ...

4-inch paper fireworks shell hemispheres. These paper hemispheres come in sets of 2 halves. They're approximately 3-5/8" in diameter before pasting...

3-11/16" spherical plastic fireworks shells, 4" in a diameter when pasted and fused. Comes in two halves, one with a 7/32" time fuse hole, one with...

4-ounce rocket tubes were specially made so that plastic ball shell #PL2020 will fit on top of them. These parallel wound tubes can also be used to...

4-ounce rocket tubes specially made so that plastic ball shell #PL2020 will fit on top of them. These parallel wound tubes can also be used to make...

4-Ounce Core Burner Black Powder Rocket Tool Set. The set contains an Aluminum spindle and base, one solid aluminum rammer, three hollow aluminum r...

This is the exact same toolset that is included with our Model Rocket Kit. We did extensive research to design a spindle that would create a high p...

This spectacular black powder rocket is easy to make. Adding titanium gives the normally orange tail a bright silvery finish.  Each kit contains a...

This is a refill kit for our 4-oz. Black Powder Rocket Kit. It contains everything in that kit, except the tooling. This spectacular black powder ...

Make simple sugar rockets with this inexpensive kit. Each kit contains everything needed to make 25 Sugar Rockets. - Potassium Nitrate, 1 pound, ...

4" 37mm Pay Load Tubes are designed to be used with 37mm hulls. Use your own homemade black powder and load these up with your choice of Stars, Smo...

4" Paper Lift Cups 20 Pieces Part #PC1185

You'll learn fireworks shell making really fast with this kit. Plastic shells are faster and simpler to make than paper shells. This kit contains e...

Length:  100 x 4" Pieces Burn Rate: 23-24 sec/ft  Part # GN1088 Diameter: 3/32" (3mm) This visco is already cut into 4" pieces.  Bag of 100. ...

5 inch ID x 32 inches long, approx. 1/4" wall, with fiberglass resin plug in the bottom and structurally reinforced lip to prevent fraying. Weighs ...

These high-quality kraft paper hemispheres come in sets of 2 halves, they're 4-1/2" in diameter before pasting. 10 sets Part #PS2050

5" diameter when pasted and fused. Comes in two halves, one with a 7/32" time fuse hole, one with leader hook recess. Comes with fuse washers and l...

Czech Military Surplus 26.5mm Red Rain Flares, 5 Rounds- Red, Metal 26.5mm shell casings Condition: Brand new, never issued.   FL2000

5" Paper Lift Cups 10 Pieces Part #PC1190

Dimensions: 5/16" ID x 4 1/4" Length x .015" Wall .332" OD, Open End Kraft Tubes Part #TU2008 Same as our lance tubes, but open on both ends!