Each rocket toolkit consists of a knurled base, a spindle, one or more hollow rammers, and a solid rammer. The first hollow rammer forms an angled nozzle from clay and is used to ram the first increment of fuel composition around the bottom of the spindle. The second and third hollow rammers are used for ramming composition up to the top of the spindle. The fourth, solid rammer is used to ram the remainder of the fuel above the spindle and the flat clay plug at the top. The base is milled from aluminum stock. The spindle is made from 304 stainless steel which resists galling and erosion from grog, titanium, and other hard materials. All rammers are custom turned to our specifications from 6061 T-6 aluminum round stock and knurled to make them easier to hold. Use parallel tubes only for these rockets.
More information on making black powder rockets, here are a few projects to get you started:
3 Pound Black Powder Rockets are easy to make. You can make them fast using this black powder rocket tooling and a simple mallet--no expensive pres...
View full details
4-Ounce Core Burner Black Powder Rocket Tool Set. The set contains an Aluminum spindle and base, one solid aluminum rammer, three hollow aluminum r...
View full details
2-Ounce Core Burner Black Powder Rocket Tool Set. The set contains an aluminum base, aluminum spindle, one solid aluminum rammer, one hollow alumin...
View full details
1 Pound Black Powder Rockets are easy to make. You can make them fast using this black powder rocket tooling and a simple mallet--no expensive pres...
View full details
Making a mess is frustrating and sometimes difficult to clean up. This tube extending ram-through funnel eliminates that problem with a high grade ...
View full details
This is the exact same toolset that is included with our Model Rocket Kit. We did extensive research to design a spindle that would create a high p...
View full details
1-Ounce Core Burner Black Powder Rocket Tool Set. Each Black Powder Rocket Tool Set contains: - Base and spindle (total height 2 7/8") - One 3...
View full details
Replacement Spindle ONLY for Turbo Pyro Tooling set. The Turbo Pyro tooling is a 3-in-1 tool set that comes with 3 different spindles. It can be u...
View full details