Fireworks Manufacturing Supplies

Skylighter has been teaching people just like you how to make their own amazing fireworks for 20 years! We learned over that time the fastest way t...

High quality, consistent burring Visco Safety Fuse. Perfect for fusing your homemade or commercial fireworks. Hot consistent burn is ideal for fusi...

Experience precise and reliable timing with our 1.6 mm visco fuse. Sold in 1-meter pieces, each 30 seconds equals 1 foot, for a total length of 10 ...

Get ready to ignite with our 2in. Pre-Cut 1.6 Safety Fuse! With a 30 second burn time for every foot, this fuse is perfect for all your pyrotechnic...

Many fireworks makers have a strong preference for the drossy, consistent burn of American Visco. Unlike Chinese fuse which can at times burn so fa...

Many fireworks makers have a strong preference for the drossy, consistent burn of American Visco. Unlike Chinese fuse which can at times burn so fa...

Many fireworks makers have a strong preference for the drossy, consistent burn of American Visco. Unlike Chinese fuse which can at times burn so fa...

Length:  30ft Roll - Pre-cut into 3ft sections Burn Rate:  60 Sec Per Foot  Diameter: 3/32" (2.5mm) Falling Leaves Fuse will add an awesome effe...

Length: 10 Feet  Burn Rate: 2 sec/in Part # GN2010 Diameter: 1/4" (6.35mm) 1/4 inch time fuse is commonly used inside fireworks shells to give ...

Length:  20 Feet  Burn Rate: 0.1-0.4 sec/ft          Diameter: 3/32" (3mm) GN1207 Quick Fuse White 0.1-0.4 sec/ft 20 foot length White Quick Vi...

Dimensions: 5/16" ID x 4 1/4" Length x .015" Wall .332" OD, Open End Kraft Tubes Part #TU2008 Same as our lance tubes, but open on both ends! 

Perfect sized tube for 1-Ounce "super bottle" rockets.  Dimensions: 1/4" ID x 2" Length x .041" Wall .332" OD, Open End Kraft Tubes Part #TU2005

Dimensions: 1/4" ID x 4" Length x .041" Wall .332" OD, Open End Kraft Tubes Part #TU2007

2-ounce rocket tubes. These tubes can also be used to make small fountains or whistles. Dimensions: 3/8" I.D, 9/16" O.D, 3/32" wall thickness, 3-1...

4-ounce rocket tubes were specially made so that plastic ball shell #PL2020 will fit on top of them. These parallel wound tubes can also be used to...

TUBES ARE OUT OF STOCK UNTIL LATE OCTOBER. IF YOU WOULD LIKE TO PRE-ORDER JUST GIVE US A CALL! 4-ounce rocket tubes specially made so that plasti...

These spiral wound tubes are perfect for making box or pill-box stars. If you have never seen the effect of a pillbox star in the sky, you have mis...

4" 37mm Pay Load Tubes are designed to be used with 37mm hulls. Use your own homemade black powder and load these up with your choice of Stars, Smo...

Theses heavy duty tubes are custom designed to work with our 3-Pound Double Voice Cracker tool set.  These tubes come in a pack of 25. Dimensions:...

High quality, spiral wound, cardboard, #100 mortar tubes. A cheap alternative to fiberglass or HDPE tubes. These tubes are not plugged. Here's h...

Dimensions: 3/4" inside diameter, 1-1/4" outside diameter, 1/4" wall, 30 inches long. These uncut, parallel wound tubes can be cut to any length y...

Dimensions: 1" ID, 1-1/2" OD, 1/4" wall thickness, 12" length 3 pound rocket tubes. These parallel wound tubes can also be used to make fountains,...

Small mortar tubes perfect for firing flying fish fuse and other small mines. How to Make Flying Fish Fuse Mines Dimensions: 3/4" ID, 7/8" OD, 1/...

Dimensions: 1" ID, 1-1/2" OD, 1/4" wall thickness, 36" length Uncut parallel wound tubes for black powder rockets, whistle rockets, strobe rockets...

2" 37mm Pay Load Tubes are designed to be used with 37mm hulls. Use your own homemade black powder and load these up with your choice of Stars, Smo...

1-1/4 inch ID cardboard mortar tubes. These parallel wound tubes are unplugged with a blue outer wrapping. They can be used to fire small shells, c...

Dimensions: 5/16" ID x 4" Length x .015 Wall .395" OD, Wall Flat End Kraft Tubes Part #TU2020

These tubes were made to be used in consumer fireworks ("Class C") mortar tubes. There's no "standard" consumer mortar tube size. So, be sure and m...

Parallel wound rocket tubes made specifically for 3-pound stinger missiles. These tubes are shorter than core burner rocket tubes and are not inter...

Parallel wound rocket tubes made specifically for 1 pound stinger missiles. These tubes are shorter than core burner rocket tubes and are not inter...

1-1/8" OD spherical plastic shells with plastic lift cup molded to bottom halves. Comes in two halves, the bottom one with 3/32" fuse hole. Shell h...

Make your first aerial shells from start to finish in an hour or less! This kit uses plastic shells which are glued and taped. They make a beautifu...

1-5/8" spherical plastic shells make 2" shells when pasted and fused. Come in two halves, one with a 3/32" fuse hole. Shell halves seal together wi...

These paper hemispheres come in sets of 2 halves and are approximately 1.45" in diameter before pasting.  20 sets Part #PS2015

Make your first aerial shells from start to finish faster then you ever thought possible! This kit uses paper shells which you'll learn to paste wi...

These cylindrical plastic shells are 1-15/16" before pasting. They come in two parts, the can and the lid. The lid has a 3/32" visco fuse hole. Met...

These cylindrical plastic shells are 1-15/16" before pasting. They come in two parts, the can and the lid. The lid has a 1/4" visco fuse hole. Meth...

This kit contains enough 2.5-inch plastic shell parts and fuse to make 50 shells.   It comes with 10 tubes and bases so you will have enough mortar...

This kit contains enough 3-inch plastic shell parts and fuse to make 15 shells and a mortar tube to fire them out of. You supply the black powder a...

Spherical plastic firework shells, two halves, one with 7/32" fuse hole. Includes fuse washer and leader ring. These shells are to be used a 3" Mo...

You'll learn fireworks shell making really fast with this kit. Plastic shells are faster and simpler to make than paper shells. This kit contains e...

These Limited Edition Nesting paper hemispheres are from the 1960's ! These bad boys have been kept in pristine condition and are of superior quali...

These paper hemispheres come in sets of 2 halves and are approximately 1.55" in diameter before pasting.  20 sets Part #PS2017

These Limited Edition Nesting paper hemispheres are from the 1960's ! These bad boys have been kept in pristine condition and are of superior quali...

These paper hemispheres come in sets of 2 halves and are approximately 1.75" in diameter before pasting.  20 sets Part #PS2020